Ultraflux UF801-P Portable ultrasonic clamp on flow meter

The UF801-P is one of the most advanced, portable ultrasonic clamp on flow meters available globally. It incorporates all the intelligence, innovation and experience acquired by Ultraflux in 40 years of being the world’s specialists and technical experts in ultrasonic transit time measurements.

Features and benefits

Suitable for liquids and gas this portable ultrasonic clamp on flow meter can be used for a wide range of applications. It is perfect for operational diagnosis or monitoring in most process plants and pipe distribution networks.

 

Unrivalled accuracy and versatility with performance accuracy up to 0.5%, measurement resolution less than 0.1 nano second and suitable flow range from 1mm per second to 45 metres per second.

 

Ability to measure almost every pipe diameter. This portable ultrasonic clamp on flow meter has probes to measure from 10mm OD to 10,000mm OD. The clamp-on probes are suitable for all metallic and plastic pipes and multi-layered pipes. Not all asbestos pipes are suitable for clamp-on probes and insertion probes may be used in more difficult applications (concrete and corroding pipes).

 

Dual chord input enables this converter to receive signals simultaneously from two sets of probes either on the same pipe or different pipes. This may be necessary when there is a pipe with a low flow bi-pass and data from both pipes is required.  It may be used when there is a challenging application requiring 4 sensors on the same pipe to obtain an accurate result. The ability to monitor two separate pipelines simultaneously with one portable ultrasonic clamp on flow meter is extremely convenient with cost and set up time efficiencies.

 

Quick and easy installation in under 5 minutes. The pipe wall thickness, connection of transducers to the transmitter, entering the parameters into the converter and mounting of the transducers can be carried out in under 5 minutes.

 

Signal quality index using echo visualisation to verify the signal quality from each chord and identify any distortions caused by electrical noise or air bubbles. The outcome of corrective actions are also verified providing the operator with the knowledge the problem has been solved.

 

Timed operation mode enables the battery life and data memory to be saved. In this mode the portable ultrasonic clamp on flow meter is only operational during user programmable time windows each day. A delayed start is another useful timer option.

 

Long battery life with up to 14 hours continuous use.  This can be spanned over days or weeks if you only need to capture flows during a small time window each day. With an auxiliary power supply cable in the accessories list, this ultrasonic clamp on flow meter can be used for longer monitoring where either power or solar power is accessible.

 

The configuration of 11 sites can be stored in the memory. This reduces set up time when revisiting a previously surveyed site.

 

The enclosure is rugged with a submersible ingress protection rating (IP68), is light weight (900g) and has a backlit LCD display. This portable ultrasonic clamp on flow meter has clearly been designed for day or night operation and to withstand most weather conditions.

 

Multiple connectivity options with the ability to accept 2 inputs from current, voltage or temperature probes.  This portable ultrasonic clamp on flow meter can generate 2 current, frequency or digital outputs and is designed to interface with SMS / GPRS data loggers, telemetry and building management systems.

 

The internal data logger has a massive memory storing 135,000 time and date stamped readings.  This equals over 6 months data at 2 minute logging intervals. The logging interval is user programmable from 1 second to 24 hours.  The logger can store a wide range of parameters including min. flow, max. flow, average flow, velocity, totalised flow, delta, gain and status.  This provides an extensive summary of the flow conditions allowing the operator to have confidence in the data. With the choice of “cyclic” or “stop when the memory is full”, this portable ultrasonic clamp on flow meter is perfect for almost all short term and long term flow investigation projects.

 

KIT DESCRIPTION
The UF801P is stored within the carrying bag with a charger, the cables between probes and converter, a PC cable and software.

 

Applications

  • Liquid flows in water, raw water, waste water, ultra-pure water, non-conductive water, oil, chemicals, refined and raw petroleum products.
  • Natural gas and compressed air flow measurements.
  • Suitable for different pipes (steel, stainless steel, asbestos cement, cast iron, carbon fibre).
  • Natural Gas Network
  • Water Network or process management
  • In line Magnetic flow meter verification
  • Temporary replacement of faulty permanent meter
  • Process or energy optimisation tool.
  • Detection of fouling in heat exchangers.
  • Performance investigation tool on valves or pumps.
  • Flow rate and calorific value measurement in the HVAC industry.